M1078 High Water Rescue Vehicle with a Custom Rear Platform and Cargo Cover

M1078 High Water Rescue Vehicle with a Custom Rear Platform and Cargo Cover for a NJ Township. 

• Tires 75% or better tread with like mounted spare tire.
• Vehicle with windshield, mirrors and seat upholstery in good condition.
• Gauges working.
• Batteries load tested and properly tied down.
• Rear Loading Platform to be custom fabricated (air lines to be capped off
  & factory hitch to be removed).
• Bar grating decking.
• Fixed steps that go into the cargo bed, off of the rear platform.
• Rope step ladders at left and right sides and at center rear from ground to platform.
• Corner posts at rear outside corners- left and right- for rescue personnel to stand and hold- with chain to truck close off side.
• Anchor points at each station at back of truck for personnel tether (1 left/1 right).
• All exterior lighting including headlights, brake lights and ICC
• Marker lights shall be upgraded to LED.
• Supplied and Installed back-up light and back-up alarm.
• Supplied and installed break away marker lights on rear corners of platform.
• Front push bumper under existing bumper
• Master battery disconnect switch - non keyed - in Cab, easily accessible.
• A Fold down bench seat supplied along 1 side with bottom seat cushion.
• An aluminum tool box capable of serving as a seat supplied along 1 side with locking lids.
• Custom red rear canopy cover with clear side panels.
• Spot Heater supplied and installed in the rear of the cargo area.
• Exterior of truck, cleaned, prepared, primed and painted.
• Upper half and body to be painted Candy Apple Red.
• Water Rescue Platform will also be painted red.
• Lower half of vehicle including frame to be painted Gloss Black.
• All paint to have clear coat applied.
• Vertical Stack added